Truma AquaGo Overview
The Truma AquaGo is an instant‚ LP gas water heater designed for recreational vehicles. It provides on-demand hot water‚ exceeding 50°C. It is installed between the fresh water supply and hot water plumbing.
Instant Water Heater Functionality
The Truma AquaGo is designed to provide a continuous supply of hot water on demand‚ eliminating the need for a storage tank. This instant water heater is powered by propane and a 12V electrical supply‚ making it suitable for use in recreational vehicles like RVs‚ travel trailers‚ and campers. It heats water rapidly as it flows through the unit‚ delivering hot water at temperatures exceeding 50°C. This functionality ensures that hot water is available whenever needed‚ enhancing the comfort and convenience of the user. The AquaGo is connected between the vehicle’s fresh water supply and its hot water plumbing system‚ seamlessly integrating into the existing plumbing. Its instant heating mechanism also reduces the risk of legionella growth.
Truma AquaGo Installation
The Truma AquaGo requires connection to both water and gas supplies‚ as well as a 12V electrical connection. Proper installation is essential for safe and efficient operation of the unit.
Connecting to Water and Gas Supplies
When connecting the Truma AquaGo to water supplies‚ ensure the drain valve is closed‚ with the lever in the horizontal position. The unit is designed to be plumbed between the vehicle’s fresh water source and its hot water plumbing. Gas connection requires a propane supply. Ensure all connections are secure and leak-free before operation‚ and verify that the appliance is compatible with the gas type being used. It is important to consult the installation manual for specific instructions and to comply with local regulations. Always use appropriate fittings and materials to maintain the integrity of the system.
Electrical Connections
The Truma AquaGo requires a 12V power supply for its operation. Ensure the electrical connections are made according to the manufacturer’s instructions in the installation manual. Verify that the wiring is appropriately sized and protected by a fuse or circuit breaker. It is essential to check the polarity of the connections to prevent damage to the unit. A proper ground connection is also necessary for safety. Any damaged wiring should be replaced immediately. Always disconnect the power supply before performing any maintenance or repairs to the electrical components of the appliance. This ensures a safe and reliable operation.
Truma AquaGo Operation
The Truma AquaGo is designed for simple operation. Refer to the user manual for specific instructions. Basic operation involves turning on the unit and adjusting temperature settings.
Basic Operating Instructions
The Truma AquaGo instant water heater is designed for ease of use. Before operating‚ ensure the appliance is properly connected to a 12V power supply and a propane source. The unit is activated when a hot water tap is opened‚ initiating the heating process. The AquaGo is designed to provide hot water on demand. Please note that the unit will heat the water to temperatures exceeding 50 degrees Celsius. Always refer to local regulations about hot water delivery to personal hygiene fixtures. The basic operation consists of water being heated as it flows through the system. Consult your manual for complete instructions and safety precautions.
Temperature Settings
The Truma AquaGo is designed to deliver hot water at temperatures exceeding 50°C. The specific temperature is not directly adjustable on the unit itself. However‚ the water temperature at the tap can be adjusted by mixing it with cold water at the fixture. Due to the high temperatures‚ it is crucial to refer to local regulations regarding the need for additional temperature controls‚ especially for sanitary fixtures used for personal hygiene. There is no specific temperature setting on the unit. The Truma AquaGo heats the water as it flows through the heater‚ providing a continuous supply of hot water. Users should exercise caution when using hot water and always check the temperature before use.
Truma AquaGo Maintenance
Regular maintenance of your Truma AquaGo is essential for optimal performance. Key tasks include draining the water heater to prevent damage from frost and addressing any common operational issues promptly.
Draining the Water Heater
Draining your Truma AquaGo water heater is a crucial maintenance step‚ especially when there’s a risk of freezing temperatures. Failure to do so could result in damage to the unit. To properly drain the system‚ first ensure the drain valve is closed by positioning its lever horizontally. This valve is located within the cold water intake. Next‚ consult your specific model’s manual for precise instructions‚ as the process may slightly vary. It’s essential to drain the water completely from the system to prevent any freezing damage. Always double check that all water has been expelled before storing your RV for the winter or when not in use during cold periods.
Troubleshooting Common Issues
If your Truma AquaGo isn’t functioning correctly‚ there are a few common issues to check. First‚ ensure the unit has a proper 12V power supply and that propane is available. If the unit indicates it is filled with water when it is not or a plug is connected incorrectly‚ try draining the water tray. Next‚ confirm the temperature setting is correct. If the issue persists‚ consult the Truma manual for your specific model. Also‚ check for error codes. If these steps don’t resolve the issue‚ it is recommended to seek assistance from a qualified technician.
Truma Ultrastore Water Heater
The Truma Ultrastore is a water heater suitable for caravans‚ motorhomes and boats. Instructions for operating this model are available for download in PDF format.
Operating Instructions
Before operating any Truma water heater‚ carefully read the instruction manual. Ensure the drain valve is closed by checking that the lever is in the horizontal position. To fill the Truma boiler with water‚ verify the drain valve is properly closed. Incorrect connection may indicate a full tank or the plug is connected incorrectly. Draining water from the tray may resolve some issues. The Truma AquaGo is connected between the vehicle’s fresh water supply and the hot water plumbing system. It requires a 12V power supply‚ and operates using propane gas. Consult the specific manual for detailed operating procedures for your model.
Truma Combi Series Heaters
The Truma Combi series heaters are designed to provide both space heating and hot water. Consult the operating manual for specific instructions on using the Combi models.
Combi Series Functionality
The Truma Combi series heaters are multifaceted units designed for both space heating and water heating in recreational vehicles. These systems integrate a powerful burner with a water tank‚ efficiently providing warm air and hot water simultaneously. Various models‚ such as Combi 4‚ Combi 6‚ and their ‘E’ variants‚ offer different heating capacities and operational features. The ‘E’ models also incorporate electric heating elements‚ allowing for operation on both gas and electric power. These heaters are known for their compact design‚ lightweight construction‚ and quiet operation‚ making them a popular choice for caravans and motorhomes. Detailed operating instructions are available in the manuals for each specific model‚ ensuring safe and effective use. The Combi series ensures a comfortable and convenient living experience while traveling‚ combining essential heating and hot water needs into a single‚ reliable appliance.
